Mi-T-M HSE-1002-0MM11 HSE Series Hot Water Electric Direct Drive, 1.5 HP Motor, 120V, 15A, 1000 PSI Pressure Washer

Description

The Mi-T-M HSE-1002-0MM11 HSE Hot Water Electric Direct Drive Pressure Washers feature a direct triplex General pump with ceramic plungers, stainless-steel and brass unloader valve, forged brass manifold, and thermal relief valve. The motor is totally enclosed and fan-cooled with manual thermal overload protection, and includes a 35-foot power cord with in-line GFCI which meets required CSA certification, and solid state electronic ignition. The unit has a reinforced powder coated steel tube frame with center balanced lifting hook, electric cord hanger, powder coated steel gun/wand holder, and locking tire brake. Components include an energy-efficient top-fired heat exchanger designed for convenient troubleshooting and easy maintenance, high quality fuel filter/water separator ensures clean fuel supply, complete system diagnostic board, float tank, pressure and high limit safety controls, No. 1 or No. 2 diesel or kerosene fired burner (Bio-fuel not approved at this time), polyethylene burner fuel tank, and easy coil drain helps prevent freezing in cold weather.
1.5-HP, 120V, 15.0A Motor
Quick connect nozzles (0 Degree, 15 Degree, 25 Degree and 40 Degree)
50-foot x 3/8-inch steel wire-braided pressure hose with quick connects, swivel and bend restrictors
Professional-grade insulated trigger gun with safety lock-off
Temperature rise 150 Degree F/66 Degree C above ambient, maximum outlet temperature is 200 Degree F. Water output temperature is 190 Degree-200 Degree F