GOWE 260w micro grid tie inverter with T-connection (22VDC to 50VDC input)

Amazon.com Price:  (as of 15/11/2021 10:03 PST- Details)

2 pieces / lot; Parameter: DC input Input voltage range: 22V to 50V. Solar Panel: Recommend using the power more than 30W and the standard voltage of 36V PV panels. Recommend using multiple solar panels. Solar panel in series will result in high-input voltage which will exceed the working voltage range of the inverter. AC output Voltage range of the inverter whose output is 220V AC.: 190V – 260V,50HZ. Voltage range of the inverter whose output is 110V AC.: 90V – 160V,60HZ.
Please connect the inverter following the operation instruction show above. If have any question please contact with relative persons. Non-professionals do not disassemble. Only qualified personnel may repair this product. Please install inverter in the low humidity and well-ventilated place to avoid the inverter over-heating, and clear around the inflammable and explosive materials. When using this product, avoid children touching, playing, to avoid electric shock.
Connected solar panels, battery or wind generators DC input DC power supply cable. instalation : Use the 4*10mm screws to fix the inverter on the holder of the solar panel. Connect the two DC terminal of the PV to the inverter, positive to positive, negative to negative. 3.Connection of AC output, connect the AC wire to the AC waterproof plug. 4.Connect the AC plug to the inverter¡¯s AC terminal.

View cart

Description

GOWE 260w micro grid tie inverter with T-connection (22VDC to 50VDC input)
2 pieces / lot; Parameter: DC input Input voltage range: 22V to 50V. Solar Panel: Recommend using the power more than 30W and the standard voltage of 36V PV panels. Recommend using multiple solar panels. Solar panel in series will result in high-input voltage which will exceed the working voltage range of the inverter. AC output Voltage range of the inverter whose output is 220V AC.: 190V – 260V,50HZ. Voltage range of the inverter whose output is 110V AC.: 90V – 160V,60HZ.
Please connect the inverter following the operation instruction show above. If have any question please contact with relative persons. Non-professionals do not disassemble. Only qualified personnel may repair this product. Please install inverter in the low humidity and well-ventilated place to avoid the inverter over-heating, and clear around the inflammable and explosive materials. When using this product, avoid children touching, playing, to avoid electric shock.
Connected solar panels, battery or wind generators DC input DC power supply cable. instalation : Use the 4*10mm screws to fix the inverter on the holder of the solar panel. Connect the two DC terminal of the PV to the inverter, positive to positive, negative to negative. 3.Connection of AC output, connect the AC wire to the AC waterproof plug. 4.Connect the AC plug to the inverter¡¯s AC terminal.
Finished all the connections, confirm the AC and DC connection is right. The LED is red when the AC power is unconnected and the LED shows like below when the AC power is connected. The LED shows like below: A)Power failure display; LED in red: Power cut off; Output failure; Power grid fault; DC low- voltage display(protection);
DC over-voltage display(protection); Over temperature display(protection); B) Power adjust display; LED in green, but flashing, it means power is in adjusting condition. LED in green and steady, it means the power is locked, and the inverter works. Single-phase connection 1.Connection electrical diagram of the solar inverter used in single-phase power generation system, Three-phase connection Connection electrical diagram of the solar inverter used in three-phase power generation system,