80A MPPT Solar Charge Controller 24VDC Fixed Charger MPPT-24V80A (80A) (Red)

80A MPPT Solar Charge Controller 24VDC Fixed Charger MPPT-24V80A (80A) (Red)

MPPT 80A Solar Charge Controller, PV input 1920 watts, Input voltage range is DC 30V-92V
Charge 2 group Lithium and Sealed Lead Acid, AGM/Gel, Non-sealed Lead Acid batteries
Adjustable charging voltage and current

$229.00 (as of November 19, 2018, 9:36 am)

Shop Now

  • Description

Description

The Concept

  • Item is powered by either PV or Battery, power up by any power source connected
  • Nighttime has no PV Voltage, so it stands by for the sun light next morning
  • When Battery drains out too low, charger continues to bring up battery voltage level
  • So whenever Battery is lower than 23v, charger will continue to charge battery
  • So whenever PV have no sunlight, charger unit will be standing by for next morning
  • It still keeps working on charging the battery whenever daylight comes out the next day
  • Put it this way, if we only power it by battery, but after Battery Voltage drains out too low, the charger will not turn back on anymore
  • If we only power it by PV, then when night time comes, charger power on will be affected
  • So we keep it power
    PV input 1920 watts
    Constant voltage charge 29.2V(28-30V settable)
    Low disconnect voltage 22V(20.8-22.8V settable)
    Low reconnect voltage25.6V(24.4-26.4V settable)
    Array input voltage range is DC 30V-92V
    • Solid built high quality
    • Lots of protections
    • Large heatsink
    • 24V DC Battery Charging
    • Wall mount
    • 2x Solar in, 2x battery in/out
    • Large gauge wiring
    • Charge 2 groups Lithium and Sealed Lead Acid AGM/Gel Non-sealed Lead Acid batteries
    • Adjustable charging voltage and current

    About this high efficient solar charge controller:

    • MPPT charge controller: MPPT Solar charge controller(Air cooling).
    • High efficiency: MPPT efficiency>99%,Peak conversion efficiency >98%.
    • Multi-stage charging: Multi-stage charging mode.
    • DC load DC load support: 24V Only
    • DSP processors: DSP processors architecture ensures high speed and performance.
    • Protection: PV array short circuit , PV reverse polarity , Battery reverse polarity , Over charging , Output short circuit.

    MPPT 80A Solar Charge Controller, PV input 1920 watts, Input voltage range is DC 30V-92V
    Charge 2 group Lithium and Sealed Lead Acid, AGM/Gel, Non-sealed Lead Acid batteries
    Adjustable charging voltage and current
    24V DC Battery Charging, 2x Solar in, 2x Battery in/out
    CE, RoHS, ISO 9001, Size 11.5 in x 6.5 in x 3.5 in